RS485 to Ethernet Converter (BF-430)

SKU: BF430
$104.50

Details

The RS485 to Ethernet Converter is a universal serial device server that enables users to connect Modbus RS485 sensors to the eGauge using a local area network. The BF430 requires a power supply (EA1001, page 8) or a direct +/- 9-30VDC connection for power. Convert RS485 serial communication from approved third-party devices to Ethernet for integration as a “remote register” on the eGauge configuration page. Please read the Third-party page section before ordering. Power supply sold separately.

Features

  • Support TCP / UDP Server / Client mode.
  • User name; password protected for web management.
  • Built-in Http server for set up and remote management via any browser easily.
  • Support backup; restore system configuration data.
  • Support Windows 95 / 98 / ME / NT / 2000 / XP / 2003 virtual COM drivers.

Tech Specs

  • Ethernet Interface: 10 / 100Base-T, Half / Full Duplex
  • Signal Port: RS232 / 485 / 422
  • RS232 Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND; Baud Rate: 1200bps ~ 230.4 kbps
  • RS485 Signal: 2 wire Data+/- (only for BF-430)
  • RS422 Signal: 4 wire R+ / R- / T+ / T- (only for BF-430)
  • CPU: 16 bit CPU, 100MHz
  • Memory: 256K ROM & 768K SDRAM
  • Watch Dog: System never halts
  • I/O Support: No
  • LED: 4, Power / RXD / TXD / ACT
  • Power Requirement: DC 9 ~ 30V, 300 mA
  • Power Consumption: 300mA (9V)
  • EMI / EMC Certification: FCC B, CE B
  • System Requirement:
  • (1) Operation temperature 0°C ~ 55°C
  • (2) Storage temperature -20°C ~ 75°C
  • (3) Operation humidity: 5% ~ 80%RH
  • Surge Protection: Serial port 15 KV ESD
  • Magnetic Protected: Ethernet port 1.5 KV
  • Connector Type: DB9 (Male) / RJ-45
  • Reset Button: Yes
  • Dimension: 67 x 93 x 22mm
  • Weight: 165g
  • Ethernet: Static IP / DHCP Client / PPPoE

Support

Knowledge BaseDocuments