Split Core with CTid
Details
Overvoltage Category: This rating shows how much surge the device can handle based on where it’s installed. For example, Category III is for breaker panels; Category IV is for utility lines or service entrances.
The eGauge series CTs are split-core current transducers (CTs) with CTid technology. CTs are installed around current carrying conductors to measure amperage as part of a power metering system. Thanks to the split-core design, they are easily retrofitted to existing power systems and do not require the conductors to be disconnected. A 333mV output means no shorting blocks are required. All eGauge CTs are UL2808 certified.
eGauge CTs use CTid technology for auto-detection and have an onboard LED which can be used to identify which CT is connected to a given sensor port. This is useful if the CT leads cannot be traced.
Tech Specs
Measurement | |
Accuracy | 1% |
Frequency | 50-60Hz |
Wire Load | 8' twisted pair lead with CT connector |
Environmental | |
Location | Indoor use, Pollution Degree 2, Altitude up to 3000m |
Temperature Range |
|
Safety & Regulatory | |
| |
Warranty | |
Standard | 5-year Limited Warranty |
Support
User & Installation Guides
Product Info & Selection